Spinning, Flo'ing and adjustable drivers

backinit · 2017-11-28T00:03:57+00:00

With all the shaft spinning and flo'ing that I've read about (and done myself) on the "old site", how do you address installing new shafts on adjustable driv...

puttnfool

kchacker well, when the guy that wrote a 5 (was it 5?) page article about it says he doesn't align his, I think I'm close to the truth. If you read that article, it's obvious that no one really knows what's going on. All they do is theorize and hope they're right.

The take a club they can't hit, spin it around until it vibrates like they like, then put it together. They go back out with it and hit it better because they think it's better and they believe they're on to something.

Simple fact is, I bet any of the top 10 golfers in the world could take my clubs and shoot even par with them. They're probably a solid 2 flexes too soft for them, none are "aligned", and the grip size is probably bigger than they like. Quite simply, the most important part of where the ball goes when you hit it is NOT whether the shaft is "aligned". The most important variable is the swing. As has been said before, practice more and you will score much lower than if you spend that time spinning your shafts around to some arbitrarily determined point.

sdandrea1

puttnfool Simple fact is, I bet any of the top 10 golfers in the world could take my clubs and shoot even par with them. They're probably a solid 2 flexes too soft for them, none are "aligned", and the grip size is probably bigger than they like. Quite simply, the most important part of where the ball goes when you hit it is NOT whether the shaft is "aligned". The most important variable is the swing. As has been said before, practice more and you will score much lower than if you spend that time spinning your shafts around to some arbitrarily determined point.

This makes a lot of sense to me, however, I have made the same argument about club fitting religion. Given enough talent and practice we could all probably shoot our best with misaligned and poorly fit clubs on a good day. That being said, there is no good reason NOT to get fit (if you have the $) or NOT scientifically build our clubs to the most consistent tolerances we can, given that building skill and the right building equipment. I just think the golf talent is more critical than the fitting/aligning.

Rickochet

puttnfool well, when the guy that wrote a 5 (was it 5?) page article about it says he doesn't align his,

The was Tutelman, and you got caught on this in another thread about this. He doesn't align his shafts because he has enough expertise to order shafts he knows don't need it. Very few others have that knowledge including you Mr. Wizard.

Par4QC

sdandrea1 😲

Par4QC

Where the hell is John Fisher to straighten this guy out properly???

puttnfool

sdandrea1 probably so. I don't build clubs because I think I'm gonna build the perfect club. I build so I can tinker with stuff and play anything I want.

Just so happens, I've been fortunate enough to build clubs for others, both in person and over the internet, that helped their games as well.

puttnfool

Par4QC you're a lost cause, too, aren't ya...

Par4QC

puttnfool you're a lost cause, too, aren't ya...

Says the small child.

puttnfool

Rickochet No, it was Dave Tutleman, not John Kaufman. I always order shafts that don't need aligned... because no shafts "need" aligned. Anyone can have any knowledge they want.

BTW, genius, Mr. Wizard died June 12, 2007.

sdandrea1

puttnfool I don't build clubs because I think I'm gonna build the perfect club. I build so I can tinker with stuff and play anything I want.

Me, as well.

puttnfool Just so happens, I've been fortunate enough to build clubs for others, both in person and over the internet, that helped their games as well.

Me, as well, but they could have been built better. I have only recently begun pre-cutting my iron shafts at both ends and using split grips and tip weights to dry fit and get all the swingweights spot on with 1/2" increments. I weigh each shaft, head and grip to match up the weights as a 8 individual matchups and tip-weight if needed. I have noticed some pretty inconsistent gaps in weights from iron clubhead to clubhead. Shafts and grips seem much more consistent in weight.

I would probably align the shafts if I knew how and had the stuff, but mostly from a building pride standpoint to have them locked in consistent. Still not convinced I'd notice a diff in play.

puttnfool

Par4QC You're fun. You argue just like a democrat resorting to name calling when you've run out of coherent arguments to try to prove your flawed point.

You're fun.

Rickochet

puttnfool No, it was Dave Tutleman, not John Kaufman.

I corrected that before you posted. None the less you got caught in the other thread for posting bull shit.

Rickochet

sdandrea1 Rick - is this because the driver shaft has the most "flex-movement" in the swing? Do stiffer shafts have less risk for this topic? Do steel shafts have spines? I am curious.

Steve, the biggest difference is steel vs. graphite. Steel iron alignment is a totally different animal.

Par4QC

puttnfool MY flawed point?

gudgawd man....get back to class. Who is even reading this for you?

Par4QC

anyone selling a huge flyswatter???

puttnfool

Par4QC Just make sure you align the shaft or you might miss...

puttnfool

I'll be back. I'll miss you guys (you know who), but duty (not doodie) calls. I gotta go do work for a little bit.

puttnfool

Rickochet Bullshit? Heck, I just copied and pasted Tutleman's words. Take that up with him.

BTW, nonetheless is one word.

ZWExton

I think you all need to let him tucker himself out with what he knows/doesn't know.

Spining/FLO'ing may be of no real consequence, but if I had the capacity to do it, I sure would. Because it MIGHT be of some consequence, and I would be pleased knowing that I had removed as many little variables as I could from my set up. Take it from a single length player - removing variables is NICE.

I'm just surprised that manufacturers haven't caught on to this. You'd think they'd be tooting the horn of any perceived benefit they could sell you on. PING irons... Now with spined/FLO'd shafts! If you don't have yours built this way, you're a CHUMP!

Sort of suggests that even they are thinking it's negligible. I mean, if it wasn't, they could charge $10 more per club with absolutely no material investment.

Who knows. I dig it. I'd love one less thing to wonder about.

puttnfool

ZWExton I think you all need to let him tucker himself out with what he knows/doesn't know.

Yeah, I will now. It's just fun getting him all worked up over something so inconsequential.

sdandrea1

Well, THAT was a lively discussion!

Rickochet

puttnfool

You are a an idiot. FGI was a better place when you got kicked off. GolfBuzz will be a better place when you leave. In the meantime how about changing your login name to Turdinthepunchbowl. Also, don't post in any of my threads and I will do the same in yours. Turdinthepunchbowl is one word.

« Previous Page Next Page »