What did you build today?

DonM · 2020-01-24T22:58:56+00:00

I'll start. Vertex AW on SK Fiber TT75R shaft. Cleveland Launcher HB 5W on UST 55 Gold R shaft.

Typhoon

It’s a 355. The Speed version is .370

Hahahaha..... never thought of that with the 7 iron. I always DO take that club. Here’s even a creepier thing. I grabbed one club from my Ping ie-1/modus 105 set to hit alongside the Nike or take out to the course and see how it compares to the Nike...

Can you guess which number iron?🙄

Par4QC

Typhoon It’s a 355. The Speed version is .370

And a .370 ferrule was most likely used on the club. So, of course the ferrule is coming loose. Take a heat gun and heat the ferrule to shrink it a little; it will then stay in place without epoxy.

My favorite iron was always the 6. Used it for chipping around the green, & it was the only club I could hit the exact same distance every time. Now, I'm like that with my 8i. The 7i had it's time, but as age progresses, the number is getting bigger.

CallMeAl

DonM I've used the same type shaft in my driver. Very stable and consistent. No wild shots, pretty much goes where you aim. Main reason I put these in my hybrids. If they preform the same as the driver, I'll be happy.

Spuzz

SMT 455DB/Accuflex VS339, Geek DCT/Fuji Vista Tour 60, SMT 3390/Swing Science 200.
🙂

Bankshot

Spuzz Post says "13 hours ago", not 13 years ago, lol! 😃

candukid

Eguller
Spuzzer wisdom comes out his ass...

Spuzz

candukid Spuzzer wisdom comes out his ass..

Here's some more wisdom:

Eguller

Spuzz
Hard to tell which of our politicians that is....

Spuzz

Eguller Hard to tell which of our politicians that is....

Nixon?

Eguller

Spuzz

For sure. But I was thinking current. Lots of candidates. 🤡

sdandrea1

sdandrea1 hit about 20 balls with the 175 Ultralight driver. No problem hitting it straight, plus a few pulls. NOTHING went right (offset, closed face). The flight is medium and the sound is very solid. The feel is very different from the XXIO and I think it's in the shaft tip. This A flex Integra shaft is light but not as soft in the tip as the 36g XXIO shaft. The flight of the range balls was "different ". It was like there was very low spin. Balls dove out of the trajectory a bit sooner and rolled out.......WAY out. This thing could be a monster in Florida. I'll take it out for 18 holes on Tuesday, possibly tomorrow and report back.

Update. After 27 holes with this driver, I'd say I'm comfortable with it. Love the sound feel and flight. Easy to hit straight. Launch angle is VERY sensitive to tee height. Distance is as long as my Cobra Fmax Super Light, but no longer. Good solid hits require smooth tempo; stepping on it results in bad shots. Not very forgiving outside the sweet spot. Overall the Cobra is a better driver. It's more forgiving, just as long, and less sensitive to tee height and tempo.

Subsonic

sdandrea1 $12 Shipped?

Spuzz

Bankshot Post says "13 hours ago", not 13 years ago, lol!

lmao!
The lofts are higher now and the flexes are softer too.
🙁

fatshot

I played yesterday (38-43-81....ran out of gas on the back nine!), and I re-learned one thing: My experiment
with graphite shafts in my wedges didn't work for me!! I have a Maltby M-Series 56* that I've had a couple of
years and like real well. Last fall I got the bright idea that I should put a graphite shaft in it to make the "feel"
the same as my other irons. Well, all that has done has taken me from a decent wedge player to an inconsistent
one!! Yesterday, I threw a different (steel shafted) wedge in the bag, and hit several good chips and pitches
for par saves! Today, my "build" is to put the steel shaft back in the Maltby wedge.....for good this time!!
(Why do I do stuff like that.....???)

scotts33

fatshot (Why do I do stuff like that.....???)

fatshot---Did you build the graphite shafted wedge the same heft match as the steel shafted wedge? What shafts did you use?

Spuzz

fatshot I got the bright idea that I should put a graphite shaft in it

I had the same idea years ago, with the same result.
I used to have wedges that were heavy and stiff and was decent with them, but no feel.
If you want more "feel", use a regular weighted iron shaft tipped to a 7 iron flex.
🙂

Mustaggolf

fatshot EXACTLY what I learned. I have my GW and 54-58 shafted in steel. Tried graphite two different times with poor results.

fatshot

scotts33
No.....and that's probably part of the problem. I have 60 gram shafts in my irons....I put a 75 gram shaft in
the wedge b/c that's what I had! Probably should have got ahold of a heavier shaft. All spring I've been feeling
like the wedge was too light, and I was inconsistent with it. I guess I've played all these years with heavier
wedges, and I need to stay with what I'm familiar with!

scotts33

fatshot No.....and that's probably part of the problem. I have 60 gram shafts in my irons....I put a 75 gram shaft in
the wedge b/c that's what I had! Probably should have got ahold of a heavier shaft. All spring I've been feeling
like the wedge was too light, and I was inconsistent with it. I guess I've played all these years with heavier
wedges, and I need to stay with what I'm familiar with!

Did you heft match (swing weight match) the same letter/number with both shafts to the same wedge head is what I am asking?

fatshot

No. With the graphite it weighs about D8. The steel wedge I used yesterday is in the E range. I get what
you're saying. The graphite was not an "apples to apples" comparison....

scotts33

fatshot No. With the graphite it weighs about D8. The steel wedge I used yesterday is in the E range. I get what
you're saying. The graphite was not an "apples to apples" comparison....

OK. Makes sense more about shaft weight/balance point than heft match. I have been able to use lighter weight graphite shafted wedges but made the wedges the same MoI (kg-cm ^ 2) as my irons with same graphite shaft 64g 40" raw 3.4 torque.

ode

scotts33 Scott , are you adding more weight to the head or cork and tungsten down the shaft to get the same MOI?

scotts33

ode Scott , are you adding more weight to the head or cork and tungsten down the shaft to get the same MOI?

Since, it's graphite I use lead/tungsten tip weights with Swing Science heads. If they were Wishon heads easier with hosel weight ports. I very rarely use powder/cork and only on steel shafts. Last time was MoI heft matching the Stan Thompson Ginty's. If the Ginty's had a removable sole plate then I would have gone there first but they do not.

Example Swing Science FC-One Plus 7i graphite Swing Science FC-One Plus shaft 64g 3.4 torque 40" raw. 37 3/8" playing length D-5 and 2656 kg-cm ^ 2. In steel I go to a target heft of 2680 kg-cm ^ 2. in Graphite I drop it 20 points to a target of 2660 kg-cm ^ 2. these are toe down measurements. In 1/2" length graduation figure .7 increase per iron on a 14" fulcrum swing weight scale would be a rough estimate. IMO this is why golfers struggle with light graphite as the heft match is poor performing for them. Check center impacts is how I test.

fatshot

scotts33
Scott, it's obvious that you are MUCH more advanced in your clubmaking knowledge and skills than I am. I'm
more the "cut/glue hobbyist" type. I would not distinguish myself with the name "clubmaker," LOL. You obviously
are! Thanks for giving me some other factors to think about....

« Previous Page Next Page »