Eguller Thanks Dan! BUT, these things need some testing so they’ll get hit a few times here in the very near future! 😊

    14 days later

    LogicalOne to take to the EPSON Tour event next week!

    I was going to drive up, just to heckle you. 😄
    But just looked at the dates.
    So, am heading the other direction, hoping to bring more fame to the Leveler.

        Just glued up KE4 Tour TC 4 and 5 hybrids. The 4h has Recoil 95 and the 5h has Xcalibur RT95. Also glued up Mavrik 4 wood with EvenFlow 75. No tournament this weekend so maybe a good time for trying stuff.

        Here are the faces of the 3 wedges along with a face from the irons (PW). Some specs:

        -All are forged carbon steel with milled faces
        -52°: 300 grams / 8° bounce / 63.5° lie
        -56°: 300 grams / 14° bounce / 63.5° lie
        -60°: 300 grams / 8° bounce / 63.5° lie

          LogicalOne Is the 60* a wide sole design with only 8* bounce? I probably need to replace my MD5 soon and I'm not seeing any 60 WS LB options.

              Spuzz

              -1020 carbon steel
              -I use FP instead of offset, but the offset would be around 1.25mm, if I’ve done my math correctly
              -I’ve bent the irons 2 degrees

              😊

                  LogicalOne 1020 carbon steel
                  -I use FP instead of offset, but the offset would be around 1.25mm, if I’ve done my math correctly
                  -I’ve bent the irons 2 degrees

                  😘

                    KCee I would not call it a wide sole design. There is a little bit of a radius grind on the back side of the sole as it transitions. The 60° shows that more than the 56° or the 52°. Kind of a progressive grind, if you will. 😊