Pinhawk Fairway Woods, Part Two

DonM · 2018-12-16T03:22:43+00:00

There was a thread on these but it turned into a long contentious thing about other things, so... Who's played or playing these, and what do you think about...

sdandrea1

Callaway is one of the few holdouts that still offer high lofted fairways. As a senior player, I have much better luck with fairway woods from 20 degrees and higher than I do hybrids. I think male egos in the market are limiting sales.

Rickochet

sdandrea1 Callaway is one of the few OEM holdouts that still offer high lofted fairways.

Fixed it for ya. 😉 TM also has an M2 7 wood.

Components wise besides the Pinhawk, Integra Sooolong and Bang SF offer fairway heads up to a 21 wood as does Super Concord. I had the Sooolong set up to the 11 wood and it is very solid but Spuzz wouldn't like the gayazz blue.

Par4QC

Are you guys trying to start another thread.....distance vs. accuracy? Hybrid vs. FW? 😉

I gotta get me a 7 wd. probably. Tried them a few years ago but they all want to have that damned closed face on them, which sends the ball into the left rough/weeds. I've been trying to hit 19 hybrids the past few years, but it's a no go with several brands. I have a 19 fw club that I hit just fine, and a 22* hybrid, which I hit just fine also. But the gap is kinda far, according to the way I hit them. 7 wd. should fill it, I think.

I gotta go with colej's response....

colej You pricks are gonna make me buy some yet!! Lol

Rickochet

Par4QC I gotta go with colej's response....

It's a battle - cheap bastages vs. pricks. 😜 I bought the Pinhawk SL fairways when they first came out and have been promoting them since, but nobody listens to me. 😞

sdandrea1

Par4QC
The loft on the Pinhawk 5w is stamped 20 degrees (a strong 7w loft), but it flies longer than any 7w I ever owned. It could be I got just the right shaft in it

sdandrea1

Rickochet

When Adams was around, I think they had 9 woods. I knew TM and Cally were still doing it. I think Cally sells an 11 wood., but they have always had those high lofts going back decades.

Par4QC

sdandrea1 The loft on the Pinhawk 5w is stamped 20 degrees (a strong 7w loft), but it flies longer than any 7w I ever owned. It could be I got just the right shaft in it

Just remembered, I did buy a new Cally Heavenwood last summer. But damn me if I can hit it straight; everything goes left. It does have somewhat of a closed face on it though. Also bought a new Cally XR 3 wd. that does the same thing. Also with slightly closed face, which I cannot deal with.😝
I'll be getting rid of both of them in the spring.

ode

IN1ZONE comes in 9w, but only 3 degrees of loft seperation between 3 - 5 - 7 - 9, so it's only 1 degree weaker then the Pinhawk 7. Here is your chance to ask Jason for an 11😉 ya geezers😋

colej

ode

Have you hit those? The In1zone FWs? I may go with the irons for this season.

ValueGolf

ode

Not trying to trash a competitor, but how does 3 degree loft separation in a fairway wood the same length make any sense?

ode

colej I have not.....made one for my dad for Xmas and it looks decent, I wouldn't call it deep face but its not low profile, I'd say face height is in the 35-36mm range, workable for those of us who like a deeper face.

ode

ValueGolf less sense then 4, that's why I pointed it out so folks would know. It does however allow a 6 degree loft seperation if say 16 - 22 or 19 - 25 is a better combo. Doubt this was the intent, but thru dumb luck I think it would work, while still allowing for SL.

I think the pinhawks look better and by user reviews they likely perform better too. I get stage freight when there is.any hint of low profile going on. We just dont get along! For me 3w is critical off the tee as my home course I need it on 4-5 holes, possibly 6 depending on conditions. And I need a deep face off the tee, just inspires more confidence!

colej

ode

I’ve got the In1zone fairways coming to try😀

kelco9

Rickochet These seem like a very deep (front to back) wood. But from what I understand, when you design a deep head you move the CG rearward, which increases the gear effect. In response, I thought you had to increase the horizontal face bulge. These don't seem to have much of a face bulge.

If these heads "work," I'm not complaining at all. A severe face bulge psyches me out. The Thriver from Hireko that I played for a while before it was stolen had a similar shape to these woods. I really liked the Thriver, but I had a bit of hard time standing over it because of the severe bulge. What has been your experience with accuracy on off-centre hits?

ZWExton

kelco9 but I had a bit of hard time standing over it because of the severe bulge

That's what she said

Rickochet

kelco9 What has been your experience with accuracy on off-centre hits?

I don't know the exact specs on the bulge but I wouldn't consider it "severe." Actually I never even thought of the bulge on these heads until you mentioned it, so it isn't something that jumps out at your.l The heads are just very solid on center hits and off center. I have had no issues with the ball squirting off right or left on off center hits. They also look very nice at address.

sdandrea1

kelco9 . What has been your experience with accuracy on off-centre hits?

Straight. Straight. Straight. I hit a toe shot today on a long par 3 (174y) that resulted in a slight push to the right and landed just short of the green. Had to carry 100 yards of water, BTW. The ball mark was way out on the toe. I crushed one today (center hit) on a par 5 (2nd shot) that carried and rolled to a spot I'd never reached before. This is a solid head.

Rickochet

Par4QC Just remembered, I did buy a new Cally Heavenwood last summer.

IIRC you were also "going" to buy some new Steelhead irons, no?

Par4QC

Rickochet 🤔 aye....and still am, now that the price is palatable. Will be trading in the 2 clubs mentioned above to make it even more tasty. They are less than 1/2 price now.

I bought a new set of TM M1 irons instead though, I admit. Beautiful heads, graphite shafts. 1st time I used them was overshooting the greens! The clubs just seem way too light though, hard getting used to them even after a few rounds, but really don't want to get rid of them. May do a reshaft. AND still get those Steelheads.
Just because, ya know?

colej

Par4QC

Slap some long strips of lead tape down the backside of the shaft (long ways). That would give you a idea if extra weight would work with those clubs.

Rickochet

colej I’ve got the In1zone fairways coming to try😀

Post some results.

« Previous Page Next Page »