sdandrea1 That is the IsI K model, which is slightly larger than the IsI. More forgiveness was the claim for the K model.

Did the ISI precede the Eye2 or was is s supposed improvement?

      Rickochet
      This is from memory, so I could be off a bit..

      1. Karsten I, II, III were first
      2. Eye
      3. Eye 2
      4. Eye 2 +no+
      5. Eye 2 +
      6. IsI
      7. IsI K
      8. ZING
      9. ZING 2
      10. Then they started the heads with the oval cavity weight, i3, i3 blade, i3 OS, i3+, i5.....the G series started sometime in there as well. I think the G2 replaced the ZING 2.

        This was from WRX back in 2008.

        i5 2007

        G5 2006-07

        G2 2003-06

        G2 HL 2003-06

        S59 Tour (w/ferrule) 2003

        i3+ 2002-03

        I3+ BLADE 2002-03

        S59 (no ferrule) 2002

        i3 Blade 1999-01

        i3 O-Size 1999-01

        ISI 1996-99

        ISI BeCu 1996-99

        ISI Nickel 1996-99

        ISI-K 1996-99

        Zing 2 1994-96

        Zing 2 BeCu 1994-96

        Zing 1992-94

        Zing BeCu 1992-94

        Eye2+ 1990-98

        Eye2+ BeCu 1990-98

        Eye (Patented) 1985-89

        Eye2 (Pat. No.) 1984-90

        Eye2 BeCu 1983-90

        Eye2 (Pat. Pending) 1982-84

        Eye (Pat. No.) 1980-85

        Karsten I (Made in USA & nbr on sole) 1977-84

        Karsten II 1977-84

        Karsten III 1977-84

        Karsten IV 1977-80

        Karsten I (US.Pat. & iron nbr on sole) 1977

        Karsten I (Patent No. with dot) 1974-77

        Karsten I (Patent pending with dot) 1972-74

        Karsten I (Patent pending/no dot) 1968-71

        2 years later

        sdandrea1

        Wow, this old thread lives. FWIW I have a set of nice Ping Eye 2+ 3 thru SW orange dot that need a new home. Reamed for .370 shafts.

          The only I’ve tried are Raptures. They are great. Like others, I’ve lusted for Beryllium Copper, but have never hit them.

            The longest I played a set of pings about 3 years was the g10s. Also liked g25s

            I've been using Ping irons for quite a few years - had a set of S56s (from new) that I used for something like 10 years, and replaced them last year with i210s.

            Have G2's that I played a lot this year. Have the G irons that I just got shortened and lie adjusted. Now everyone is doing it. Also had Raptures.

            sdandrea1 Sending my black dot Eye 2+ set back to PING for a bend up to blue and a retumbled/paint fill. Pics when they get back.

            What's the tab on doing that per club ? Curious....

                Quoted me $118 to shorten, re grip, and alter to Orange Dot for 8 clubs. That's $14.75 per. Don't know if is because I am the registered owner or not. That includes new grips.

                  sdandrea1 Refinishing costs more, apparently.

                  Just heads or are you sending in the complete clubs ?

                      Eguller Just heads or are you sending in the complete clubs

                      Complete clubs, at their request. I wanted to send heads only but they were kind of insisting. They offered me a $20 shipping label for here to Phoenix. I grabbed it.

                        johnnydoom The only I’ve tried are Raptures. They are great. Like others, I’ve lusted for Beryllium Copper, but have never hit them.

                        The Rapture J-Spec is something I used to look for. A little more players look then the standard one. Coppers… back when we had balata they really enhanced the soft feel. Now… I had a set and with todays balls they didn’t feel more soft than anything else.

                          sdandrea1 Curious how much they charge you for that work. The clubs can be found everywhere for $100. Granted for $100 they won’t look brand new like yours will but are you just going to use them or hold on to them in a collection?