Need Trim Help For UST Mamiya ATTAS Shaft

Rickochet

A bud asked me to build him a Titleist 816H1 27° hybrid. He gave me the head, adapter and a UST Mamiya Attas International Series ISA1000 Graphite Shaft.370 Hybrid S flex. I can't find a thing on how to tip trim this shaft. I have never used one of the adapters. I figured out the alignment from a stock Titleist photo. So any help on how to tip trim this shaft for the 816H1 adapter would be appreciated.

Sneakylong

Rickochet

http://www.ustmamiya.com/golf-shafts/brands/irod/irod-hybrid/

Can't find that shaft on their website. All the ATTAS shafts say tip trim 1.5" for a 7 wood. No listing for a hybrid tip trim. The Irod says to tip trim up to 2" on the 5 hybrid. My guess would be you'd be in the ball park tipping 1.5" to 2". I would give them a call.

Rickochet

Sneakylong Can't find that shaft on their website. All the ATTAS shafts say tip trim 1.5" for a 7 wood. No listing for a hybrid tip trim. The Irod says to tip trim up to 2" on the 5 hybrid. My guess would be you'd be in the ball park tipping 1.5" to 2". I would give them a call.

I think you are in the ball park. Looks like all UST hybrid shafts are pretty consistent in trim. I have an email in to UST. Thanks.

MidwayJ

I don't know where to find tipping info on that shaft but another thing too keep in mind is most adapters result in a larger BBGM. Assuming the objective is achieving the same profile as with recommended tipping for a glued head, you would likely need to trim extra to compensate for the BBGM difference.

Rickochet

MidwayJ I don't know where to find tipping info on that shaft but another thing too keep in mind is most adapters result in a larger BBGM. Assuming the objective is achieving the same profile as with recommended tipping for a glued head, you would likely need to trim extra to compensate for the BBGM difference.

I was going to take BBGM into consideration. The adapter has a bore depth of just over 1.5" and BBGM is just under 1". Thanks for the tip.

Rickochet

Got an email from UST today. They recommended a tip trim for a 6 hybrid at 2". I think I will go with that and the standard 38.5" length which Titleist uses. Thanks dudes for the info.