sdandrea1

I will see if I can grab the specific COG later when I have access to the software. Although I am not family with the Mizuno’s, TM’s or Muira’s, I would guess the COG is going to be a little lower with the L1.XX’s.

As far as similarities, I can’t say that either. lol I start with a design/concept and what I want to accomplish with the iron head and then start piecing everything together based off of prioritization. When making adjustments I use a weighting calculation (values) to help determine and finalize the initial prototype shape.

Ok, so that was a bit of a ramblings of a madman response there. lol 😂😊

Yes, available as heads only and should be VERY reasonably priced (I hope). Here are the offsets (in mm).

      Go ahead and sign me up for a set of heads, 2 degrees upright. 👍.......oh, and that 31 and 36 degree hybrid with the .335 hosel. 😎

        sdandrea1 Are they similar to an older Mizuno design?


        There's definitely a passing resemblance to these Mizuno irons from around 25 years ago... (I played a set of Pro IIs for several years in the late 1990s into the early 2000s.)

            LogicalOne Thanks.....for not being a crazy person. 😂
            It let's 'some' people put the 6i back in the bag. And you don't have to sell 7-PW/GW, as we 'might' ask for. 🤔

              These look really nice -- they remind me of a set I never had a chance to get -- UT Golf's Shield iron heads. I was going to order them them in the Spring, they got bought out (I think by Golfworks, IIRC), and all the designs were gone.