Just glued up KE4 Tour TC 4 and 5 hybrids. The 4h has Recoil 95 and the 5h has Xcalibur RT95. Also glued up Mavrik 4 wood with EvenFlow 75. No tournament this weekend so maybe a good time for trying stuff.

Here are the faces of the 3 wedges along with a face from the irons (PW). Some specs:

-All are forged carbon steel with milled faces
-52°: 300 grams / 8° bounce / 63.5° lie
-56°: 300 grams / 14° bounce / 63.5° lie
-60°: 300 grams / 8° bounce / 63.5° lie

    LogicalOne Is the 60* a wide sole design with only 8* bounce? I probably need to replace my MD5 soon and I'm not seeing any 60 WS LB options.

        LogicalOne All are forged carbon steel with milled faces

        What's the carbon number?
        How much can they be bent?
        I am like ode=need them flat

        Offset?
        🙂

            Spuzz

            -1020 carbon steel
            -I use FP instead of offset, but the offset would be around 1.25mm, if I’ve done my math correctly
            -I’ve bent the irons 2 degrees

            😊

                LogicalOne 1020 carbon steel
                -I use FP instead of offset, but the offset would be around 1.25mm, if I’ve done my math correctly
                -I’ve bent the irons 2 degrees

                😘

                  KCee I would not call it a wide sole design. There is a little bit of a radius grind on the back side of the sole as it transitions. The 60° shows that more than the 56° or the 52°. Kind of a progressive grind, if you will. 😊