sdandrea1 20 for the putter head on eBay and the rest was laying around the shop. 😉

Can we name it “Steve’s Long Pole”??

    I built a test 7 iron using the iDrive Tour shaft that’s supposed to be the same as the FGS+. It took a while to find a flo plane, and I had to re-do it at the playing length. Maybe these filament wound shafts don’t have spines, but they still have irregularities.

    I reshafted my XR16 4 wood with the FGS+ electric yellow shaft. Flo-ing is easier on the wood shafts, so far.

      DonM Maybe these filament wound shafts don’t have spines

      Using a spine finder that I built, I have never, ever, found a graphite shaft without at least 1 spine, even the wound type.
      Just sayin'.....it ain't true what they say.😉

          Par4QC Using a spine finder that I built, I have never, ever, found a graphite shaft without at least 1 spine, even the wound type.
          Just sayin'.....it ain't true what they say.😉

          How could you NOT say, “and that’s no BS”!😂😂

            KCee What's I've actually found is that FLO'ing a shaft with a less noticeable spine is much more difficult, since the spine itself acts as a somewhat of a stabilizer when trying to find the optimal flex plane.

              I notice a lot of times the graphics are oriented by the manufacturer so that the 6-12 plane is the softer CPM plane and the 3-9 plane is the firmer plane. I always figured the 3-9 should be the softer plane. But the shaft industry doesn't seem to agree.

              If you care about it, which orientation do you assemble at for the the harder and softer planes?

              One thing for sure, shafts have come a long way. It's pretty rare for me to find more than 3 CPM difference around a shaft. I remember when it could be 10. Those were the spiney Type 2 shafts that could be on rails if you got them installed right. Now I feel like you can pretty much just glue and go, graphics up or down. I still like to find the FLO, because I can.

              Finished these Tm 790 for a customer. When I ordered the RT75 shafts for this build. This new shaft showed up for me to demo.



                colej
                gawd he needs a new graphic designer, lol.

                Must be a wood shaft🤔....what you gonna pair it up with?

                    ode

                    Going in a srixon zx7 driver and I agree regarding the graphics. 😂

                      Par4QC Hope he has good balance. Might do a 'spin around' on the 1st swing with all the weight loss! 😄

                      I told him there'd be an "adjustment period". He has Wishon 830CL hybrids with the S2S graphite in mid irons and he launches them very well. He says his irons feel "heavy".

                          sdandrea1 He says his irons feel "heavy".

                          TT lite...I'll bet they do. I got some of those in my backyard.....holding up the fence!!