Another club-building question - grip weight's affect on swingweight

sdandrea1 · 2017-11-29T21:57:41+00:00

Soooooo, I like to dry-fit everything before expoxying so I can use internal weights vs lead tape to achieve swingweight goals. I also like to use midsize G...

Nordique

Cut shaft weight. Not uncut.
For example:
3 iron-Head weight= 239 grams
Shaft weight 110.1 grams(after tip and butt trimming)

You find your ideal club and match everything to within 1% of your ideal club. Manipulate head weight and shaft length to reach your target

You can remove the last 2 digits in the MOI row. It's overkill

sdandrea1

Nordique

I understand it better now - thanks so much. This formula/sheet allows me to pick a favorite base club (maybe 8 iron) and then match MOI to that by manipulating shaft length and head-weight up and down the set.

puttnfool

Nordique It's overkill

Anything worth doing is worth overdoing...

Nordique

You got it.

Provisional

puttnfool
Well said
I've apparently applied that to my swing as well as tech issues re swing wt

Nordique

puttnfool Anything worth doing is worth overdoing...
The perfectionist 😄 I believe the last 2 digits equate to peanuts in terms of grams. But hey if
someone wants to do it I have no problem with it:

https://www.tutelman.com/golf/shafts/allAboutSpines6.php
The perfectionist. I know a lot of clubmakers who build to much tighter specs than necessary "because I can". These are people who get a frequency meter that measures to 0.1cpm so they can do a better job of frequency matching. They get a digital swingweight scale not for the convenience, but so they can match swingweight to a tenth of a point. And they insist on aligning a spine if they can measure it -- and are often troubled if they can't detect it. To them I say, "If your time to do this is compensated, either by money or personal satisfaction, then it is worth it to you. But don't confuse 'because I can' with 'it matters in terms of tangible results'.

Nordique

sdandrea1 5. - this eliminates 1/2" increments and requires butt trimming to weird lengths like 36.723 inches

One more thing. The quickest and easiest way to reach a MOI target is to manipulate head weight and length.

And it believed to be easier to do so by using 3/8 spacings instead of the usual 1/2

Now if you want stay on course with 1/2 increments and not fool with club lengths you might have to remove weight from the heads.

Stuart G posted the following for drilling instructions:
http://www.golfwrx.com/forums/topic/1567280-going-lighter-swing-heft/#entry16481272

sdandrea1

Nordique And it believed to be easier to do so by using 3/8 spacings instead of the usual 1/2

Interesting. I was doing "what-if" scenarios with the sheet and noticed that when I use .375 (3/8)" progression, the 1% delta tolerances tightened up even more. The numbers bear that theory out.

« Previous Page