sdandrea1 epoxy the weight and shaft into the hosel at the same time
I do but I put the weight in first but don't put epoxy on the slotted side, only to opposite side. There's no forces acting on a tip weight so just a bit of epoxy is needed to prevent rattle.
sdandrea1 I usually apply the epoxy into the hosel, drop the weight in and then insert the shaft.
I do the opposite, apply expoxy on the shaft tip only so the excess scwirts out the hosel instead of into the shaft making a plug.
That way when I pull a shaft it come out with the tip weight in it AND the shaft still vents. And if you need to remove the tip weight, just drill it out, the debri will fall out the other end.